Ports 搜索

U-Boot loader for PandaBoard. To install this bootloader, copy the files MLO and u-boot.img to the FAT partition on an SD card. Normally this is partition 1, but different partitions can be set with U-Boot environment variables. This version is patched so that: * ELF and API features are enabled. * The default environment is trimmed to just what's needed to boot. * The saveenv command writes to the file uboot.env on the FAT partition. * The DTB file name is passed to ubldr using the fdtfile env variable. It defaults to omap4-panda.dtb unless you override it. ubldr loads the DTB from /boot/dtb/ on the FreeBSD partition. (Not tested) * By default, it loads ELF ubldr from file ubldr on the FAT partition to address 0x88000000, and launches it. For information about running FreeBSD on the PandaBoard, see https://wiki.freebsd.org/FreeBSD/arm/PandaBoard For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot

U-Boot loader for Banana Pi M3. To install this bootloader, follow the instructions in http://linux-sunxi.org/Bootable_SD_card#Bootloader This version is patched so that: * ELF and API features are enabled. * The default environment is trimmed to just what's needed to boot. * The saveenv command writes to the file u-boot.env on the FAT partition. * The DTB file name is chosen based on the board model and passed to ubldr using the fdtfile env variable. ubldr loads the DTB from /boot/dtb/ on the FreeBSD partition. * By default, it loads ELF ubldr from file ubldr on the FAT partition to address 0x42000000, and launches it. For information about running FreeBSD on Banana Pi M3, see https://wiki.freebsd.org/FreeBSD/arm/Allwinner For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot

U-Boot loader for pcDuino3 To install this bootloader on an sdcard just do : dd if=/usr/local/share/u-boot/u-boot-boardname/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync This version is patched so that: * ELF and API features are enabled. * The default environment is trimmed to just what's needed to boot. * The saveenv command writes to the file u-boot.env on the FAT partition. * The DTB file name is chosen based on the board model and passed to ubldr.bin using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on the FreeBSD partition. * By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition to address 0x42000000, and launches it. For information about running FreeBSD on Allwinner boards, see https://wiki.freebsd.org/FreeBSD/arm/Allwinner For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot

NLTK is a leading platform for building Python programs to work with human language data. It provides easy-to-use interfaces to over 50 corpora and lexical resources such as WordNet, along with a suite of text processing libraries for classification, tokenization, stemming, tagging, parsing, and semantic reasoning, and an active discussion forum. Thanks to a hands-on guide introducing programming fundamentals alongside topics in computational linguistics, NLTK is suitable for linguists, engineers, students, educators, researchers, and industry users alike. NLTK is available for Windows, Mac OS X, and Linux. Best of all, NLTK is a free, open source, community-driven project. NLTK has been called "a wonderful tool for teaching, and working in, computational linguistics using Python" and "an amazing library to play with natural language".

mod_backtrace is an experimental module for Apache httpd 2.x which collects backtraces when a child process crashes. Currently it is implemented only on Linux and FreeBSD, but other platforms could be supported in the future. Requirements: Apache httpd >= 2.0.49 must be built with the --enable-exception-hook configure option and mod_so enabled. Activating mod_backtrace: 1. Load it like any other DSO: LoadModule backtrace_module modules/mod_backtrace.so 2. Enable exception hooks for modules like mod_backtrace: EnableExceptionHook On 3. Choose where backtrace information should be written. If you want backtraces from crashes to be reported some place other than the error log, use the BacktraceLog directive to specify a fully-qualified filename for the log to which backtraces will be written. Note that the web server user id (e.g., "nobody") must be able to create or append to this log file, as the log file is

mod_whatkilledus is an experimental module for Apache httpd 2.x which tracks the current request and logs a report of the active request when a child process crashes. Requirements: Apache httpd >= 2.0.49 must be built with the --enable-exception-hook configure option and mod_so enabled. Activating mod_whatkilledus: 1. Load it like any other DSO. LoadModule whatkilledus_module modules/mod_whatkilledus.so 2. Enable exception hooks for modules like mod_whatkilledus: EnableExceptionHook On 3. Choose where the report on current activity should be written. If you want it reported to some place other than the error log, use the WhatKilledUsLog directive to specify a fully-qualified filename for the log. Note that the web server user id (e.g., "nobody") must be able to create or append to this log file, as the log file is not opened until a crash occurs.

Transmission Web Interface (Clutch) is a WebUI for the Transmission BitTorrent client. It allows you to manage your torrents from anywhere you can access the internet, and runs on OS X and various flavors of *nix. It provides most of the basic features of the desktop client, including torrent upload, torrent start/stop, file path selection, speed limiting etc. Transmission has been built from the ground up to be a lightweight, yet powerful BitTorrent client. Its simple, intuitive interface is designed to integrate tightly with whatever computing environment you choose to use. Transmission strikes a balance between providing useful functionality without feature bloat. Furthermore, it is free for anyone to use or modify. You will need to install either transmission-daemon, transmission-gtk2 or both to use WebUI.

Xplore is a powerful and highly configurable Motif file manager with an Explorer-like user interface. Besides the usual tree and file views, xplore also has a "shelf", a kind of clipboard inspired by the NeXT file manager, and a "log" pane for capturing output from launched programs. The builtin automounter allows you to access special devices in a transparent manner. Files can be moved and copied using simple mouse operations, and you can execute type-specific shell commands when a file is opened, used as the target of a drag and drop operation, or manipulated using popup menus. File types can be defined in terms of arbitrary filename and MIME type patterns. Full keyboard navigation is also supported, including an incremental filename search facility. Last not least, xplore speaks all standard X11 session management protocols and thus integrates nicely with most popular desktop environments.

This is the Mowitz ("More widgets") library. The project's goal is to create a library of widgets for X applications to use. The widgets have been snarfed from various sources and are all open source (GPL or MIT licenses). Available widgets o Canvas o Ruler o Check o Slider o Combo o Spinner o Frame o Tabs o Handle o TextField o Image o Tooltip o ListTree o VSlider o Notebook o Rudegrid o And a complete menu kit. The original reason for creating this library is that the Athena widget set lacks a lot of widgets that would be useful, and many of the existing widgets leave a lot to be desired in appearance and behaviour.

Cross platform ============== Kivy is running on Linux, Windows, MacOSX, Android and IOS. You can run the same code on all supported platforms. It can use natively most inputs protocols and devices like WM_Touch, WM_Pen, Mac OS X Trackpad and Magic Mouse, Mtdev, Linux Kernel HID, TUIO. A multi-touch mouse simulator is included. Business Friendly ================= Kivy is 100% free to use, under LGPL 3 licence. The toolkit is professionally developed, backed and used. You can use it in a product and sell your product. The framework is stable and has a documented API, plus a programming guide to help for in the first step. GPU Accelerated =============== The graphics engine is built over OpenGL ES 2, using modern and fast way of doing graphics. The toolkit is coming with more than 20 widgets designed to be extensible. Many parts are written in C using Cython, tested with regression tests.