dfu-programmer is a Device Firmware Update based USB programmer
for Atmel chips with a USB bootloader.
This program is a Gtk+/Gtkmm front end for the efax program for receiving and
sending faxes with a fax modem. Any files to be faxed must be in postscript
format, which is the generic printer format for Unix/Linux systems. The
program will use ghostscript to convert these into the Group 3 fax format which
the fax modem will understand.
Digital modem program.
Supports the following digital modes:
CW,
DominoEX 4 DominoEX 5 DominoEX 8 DominoEX 11 DominoEX 16 DominoEX 22,
Feld-Hell FSK-Hell FSK-Hell 105,
MFSK-8 MFSK-16 MFSK-16 pix ,
PSK-31 QPSK-31 PSK-63 QPSK-63 PSK-125 QPSK-125,
OLIVIA / Contestia various tones and bandwidth,
RTTY various Baud Rates, Shifts, Nbr of data bits, etc.,
Throb-1 Throb-2 Throb-4 ThrobX-1 ThrobX-2 ThrobX-4,
WWV Receive only - calibrate your sound card to WWV and
Freq Analysis Receive only - be ready for the (next)
ARRL FMT (freq meas test).
Gpredict is a real time satellite tracking and orbit prediction program
written using the Gtk+ widgets. Gpredict is targetted mainly towards ham
radio operators but others interested in satellite tracking may find it
useful as well. Gpredict uses the SGP4/SDP4 algorithms, which are
compatible with the NORAD Keplerian elements.
GtkMMorse is a morse code learning tool which provides Koch and "Classic"
training methods
The Ham Radio Control Libraries, Hamlib for short, is a development effort
to provide a consistent interface for programmers wanting to incorporate
radio control in their programs.
Hamlib will allow authors of software logging programs, digital communications
programs, or those wanting to develop the ultimate radio control software to
concentrate on the user interface and the basic function of the program rather
than radio control.
SDR-J (formerly Jsdr) is a suite of four programs provided under a
LGPL open source license for playing around with sdr (software
defined radio). The software can be used directly with the PM-SDR
kit and RTL2832U based dongles, and in the 32 bits Windows version
with other kits as well.
The suite contains four programs:
- a full blown "short wave" receiver, which provides tuning in the
range of 100K .. 165M using the PM-SDR (although above 55 M with
reduced performance) and from app 55 MHz to app 900 Mhz or above
using an RTL2832U based dongle. The receiver provides quite a number
of decoders for amateur modes.
- am/fm receiver covering the same frequency bands as the sw receiver,
however, with am bandwidths selectable, with fm mono and stereo
decoding as well as with rds decoding.
- spectrum viewer for use with the RTL2832U based dongles, showing
spectra of up to 3 Mhz bandwidth.
- mini receiver, a stripped version of the fm receiver, a gadget
for listening to WFM using DAB sticks.
The jerm is primarily intended to communicate with a remote machine through a
serial interface. Additionally jerm can communicate with another through
a TCP/IP connection like telnet and relay a serial communication to a
TCP/IP connection to another remote machine.
KLog is a simple amateur radio logging program for KDE. It supports QSL
management, DXCC, WAZ and local awards, DX Clusters, Basic IOTA, Satellite
support, and import from ADIF, TLF, and Cabrillo formats.
libfap is a quick and dirty C port of the Ham::APRS::FAP
Finnish APRS Parser Perl module.
As the original Perl code, libfap parses normal,
mic-e and compressed location packets, NMEA location packets, objects,
items, messages, telemetry and most weather packets.
For more description, see the Perl module.