The Yubico authentication device Yubikey generates one-time passwords that can
be used for authentication. This module allows you to use the Yubikey device to
authenticate to the PAM system.
Python Social Auth is an easy-to-setup social authentication/registration
mechanism with support for several frameworks and auth providers.
This is fdisk from util-linux package, common on Linux systems.
It allows interactive manipulation of partitions including logical ones
from MS-DOS partitioning scheme.
WindowMaker dockapp that displays your system uptime
U-Boot loader for Banana Pi M2.
To install this bootloader, follow the instructions in
http://linux-sunxi.org/Bootable_SD_card#Bootloader
This version is patched so that:
* ELF and API features are enabled.
* The default environment is trimmed to just what's needed to boot.
* The saveenv command writes to the file u-boot.env on the FAT partition.
* The DTB file name is chosen based on the board model and passed to ubldr
using the fdtfile env variable. ubldr loads the DTB from /boot/dtb/ on
the FreeBSD partition.
* By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
to address 0x42000000, and launches it.
For information about running FreeBSD on Banana Pi, see
https://wiki.freebsd.org/FreeBSD/arm/Allwinner
For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
U-Boot loader for OrangePi One.
To install this bootloader on an sdcard just do :
dd if=/usr/local/share/u-boot/u-boot-boardname/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
This version is patched so that:
* ELF and API features are enabled.
* The default environment is trimmed to just what's needed to boot.
* The saveenv command writes to the file u-boot.env on the FAT partition.
* The DTB file name is chosen based on the board model and passed to ubldr.bin
using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
the FreeBSD partition.
* By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
to address 0x42000000, and launches it.
For information about running FreeBSD on Allwinner boards, see
https://wiki.freebsd.org/FreeBSD/arm/Allwinner
For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
U-Boot loader for Olinuxino Lime.
To install this bootloader on an sdcard just do :
dd if=/usr/local/share/u-boot/u-boot-boardname/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
This version is patched so that:
* ELF and API features are enabled.
* The default environment is trimmed to just what's needed to boot.
* The saveenv command writes to the file u-boot.env on the FAT partition.
* The DTB file name is chosen based on the board model and passed to ubldr.bin
using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
the FreeBSD partition.
* By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
to address 0x42000000, and launches it.
For information about running FreeBSD on Allwinner boards, see
https://wiki.freebsd.org/FreeBSD/arm/Allwinner
For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
U-Boot loader for pcDuino3
To install this bootloader on an sdcard just do :
dd if=/usr/local/share/u-boot/u-boot-boardname/u-boot-sunxi-with-spl.bin of=/path/to/sdcarddevice bs=1k seek=8 conv=notrunc,sync
This version is patched so that:
* ELF and API features are enabled.
* The default environment is trimmed to just what's needed to boot.
* The saveenv command writes to the file u-boot.env on the FAT partition.
* The DTB file name is chosen based on the board model and passed to ubldr.bin
using the fdtfile env variable. ubldr.bin loads the DTB from /boot/dtb/ on
the FreeBSD partition.
* By default, it loads PIE ubldr.bin from file ubldr.bin on the FAT partition
to address 0x42000000, and launches it.
For information about running FreeBSD on Allwinner boards, see
https://wiki.freebsd.org/FreeBSD/arm/Allwinner
For general information about U-Boot see WWW: http://www.denx.de/wiki/U-Boot
Some Perl::Critic policies to make your code more clean.
Perl::MinimumVersion takes Perl source code and calculates the minimum
version of perl required to be able to run it. Because it is based on
PPI, it can do this without having to actually load the code.